CCNA Routing and Switching
Details
CCNA -Cisco Certified Network Associate :
It is an entry-level network engineers that helps maximize your investment in foundational networking knowledge and increase the value of your employer's network, CCNA R&S validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks.
This associate level CCNA Certification forms a strong foundation for other CCNA tracks like Voice or Security as well as the CCNP (Professional level) Routing and Switching certification program.
Pre requisites: None
Cost Per Candidate for normal track:
Note : VAT- All Quotations and Invoices will be VAT (5%) compliant with effect from 1st Jan 2018 as per FTA regulatory requirements.
Duration : 30-40 hours (2months for regular duration)
Outline
- Module 1
- 1. Fundamentals of Networking
- a. OSI layers
- b. TCP/IP layers
- c. Identifying Router and Switch IOS Software
- d. Cable, Ports and Connectors to connect Cisco Network Devices
- Module 2
- 1. IP addressing
- a. IPv4 addressing
- b. Subnetting
- c. VLSM - Variable Length Subnetting Mask
- d. Super netting
- Module 3
- 1. Router Management
- a. Identifying Router Components and accessories
- b. Connecting to a Cisco Router and Switches via Console
- c. Router Password Set and Reset
- d. Configuring Switch Password Reset
- e. Assigning IP address on an interface
- f. Interface Specific Configurations
- g. Loopback interface
- h. Login , EXEC and MOTD Banners
- i. Copy Command
- j. Cisco Device Initial Configuration
- k. Basic Password Authentication
- l. Password Encryption Service
- m. Configuring exec timeout and Login Failure Rate
- Module 4
- 1. IP Routing
- a. Configuring Static Routing
- b. Configuring a Floating Static Route
- c. Configuring a Static Default Route
- Module 5
- 1. Routing protocol
- 2. RIP
- a. Configuring Routing Information Protocol(RIP) version1 and Version 2
- b. Metric Calculation
- c. Configuring RIP Timers
- d. Configuring RIP Interface Options
- e. Passive-interface Default
- f. Route Summarization
- g. RIP Default Information Originate
- h. RIP Route Metric - Distance Command
- 3. EIGRP
- a. Configuring Basic EIGRP
- b. Metric Calculation
- c. EIGRP split Horizon
- d. EIGRP stub Area Networs
- e. EIGRP Timers
- g. Passive-interface default
- h. Summarization
- 4. OSPF
- a. Basic OSPF
- b. OSPF Neighborship
- c. OSPF Timers
- d. Metric Calculation - Cost
- e. Passive-interface Default
- f. OSPF maximum-paths
- g. Summarization
- h. OSPF Stub Areas
- Module 6
- 1. Route Redistribution
- a. Static Route Redistribution
- b. Mutual OSPF and RIP Redistribution
- c. Mutual OSPF and EIGRP Redistribution
- d. Mutual EIGRP and RIP Redistribution
- Module 7
- 1. Access-list and NAT
- a. Standard Access-list
- b. Extended Access-list
- c. Numbered and Named Access-list
- d. Static NAT
- e. Dynamic NAT with Overloading
- f. Dynamic NAT with PAT
- Module 8
- 1. Switching Concepts
- a. VLAN's
- b. Configuring Access Modes
- c. Configuring Trunk interface using ISL and dot1q encapsulation
- d. Vlan Trunking Protocol (VTP)
- e. VTP Pruning
- f. Inter-vlan Routing(Router-on-a-Stick)
- g. STP - Spanning-Tree Protocol
- h. Rapid-STP, PVST, PVST+, MST
- i. Spanning-Tree Features - POrtfast, BPDUGuard, BPDUFilter
- Module 9
- 1. WAN Technologies
- a. Configuring WAN interface with PPP or HDLC encapsulation
- 2. Basic Of Frame-Relay
- Module 10
- 1. MPLS
- a. Introduction to MPLS.
- b. Label Stack
- c. LDP and TDP peer
- d. Layer3 MPLS Table - LFIB
- e. MPLS ping and Traceroute
Emtech Computer Institute was established in the year 1993 with a vision to enhance people potential by way of delivering quality training, real-time job experience and certification programs.
Over a period of more than two decades of Service Excellence in the region we have empowered many Individuals to become very successful in their professional career by providing value driven training and education programs. Our world-class lab facilities are unique which are accessible 24/7 to the candidates to practise any time. Our experienced & certified faculties are focused on delivering quality training programs and real-time practical experience to sharpen the skillset of Emiratis and Expatriates in the region.
EMTECH Cisco training Dubai is a trusted provider of Cisco technologies trainings and certifications that validate enterprise IT skills, and recognize experts IT professionals with impeccable technical capabilities and real-world experiences to successfully install, manage, and monitor Cisco products and technology solutions.
Related Courses
